Showerheads are not uncommon, and modern households use showerheads for showers in bathrooms. And shower leakage is also a common problem. Improper installation and use can lead to shower leakage. So how to prevent the problem of showers and showers? Next, I will introduce them to you.

How to prevent the shower from leaking - installation method

The installation height of the showerhead can be divided into two types according to the type of showerhead: the surface-mounted lift-bar showerhead is generally defined by the water surface of the showerhead, and the distance is preferably 2 meters. It should be noted that these data are only average data, and the actual installation of the shower should be adjusted according to the height of the user. The buried water pipe of the exposed shower switch should be hot on the left and cold on the right. The center distance should be 3750px. The buried water outlet on the wall should be level with the tile surface. The inner buried water pipe should be perpendicular to the wall. face at a 90-degree angle. In addition, the adjustment of the shower water pressure is also a key: under normal circumstances, the water pressure within 1.5 kg is the most suitable for the shower. Excessive water pressure will cause the shower to burst, and the water pressure is too small.

How to prevent the shower from leaking - the repair method

1. Basin faucet and kitchen faucet have small water output and no bubbles Possible reasons: The water pressure is too low, causing the bubbler to be unable to generate bubbles

Solution: Remove the faucet and replace it with a new bubbler

2. Possible causes of water leakage at the connection between the hose and the faucet: improper installation, deformation of the rubber ring, uneven or too thin outlet pipe joints, or mismatch between the hose and the faucet.

Solution: Select the appropriate hose and faucet according to the specifications, and replace the rubber ring and reinstall it.

3. Possible reasons for the low water temperature: The power of the water heater is insufficient, and the temperature is not adjusted in place

Solution: To adjust the temperature control button or buy a large water heater shower maintenance skills, you should ask experienced professionals for construction and installation. When installing, the shower should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.

Special attention should be paid to removing the debris in the pipeline before installation, otherwise the shower will be blocked by debris in the pipeline, thus affecting the use. Under the condition that the water pressure is not lower than 0.02mPa (ie 0.2kgf/cm3), after using for a period of time, if the water output is found to decrease, or even the water heater is turned off, you can gently tap the water outlet of the shower. Unscrew the screen cover, remove impurities, and generally return to normal.

Remember not to forcibly disassemble the shower. Due to the complex internal structure of the shower, non-professionals should not use too much force when switching the shower faucet and adjusting the water outlet of the shower, just turn it gently. Even traditional faucets don't require a lot of force. Pay special attention not to use the faucet handle and shower bracket as a handrail to support or use. The metal hose of the bathtub shower head should be kept in a natural stretch and should not be coiled around the faucet when not in use. At the same time, pay attention not to form a dead angle at the joint between the hose and the faucet, so as not to break or damage the hose.